Category: Products Hand-push mobile gas detector
Key words: Products
Model: SK/MIC-700
Measurement object: Combustible/oxygen/carbon monoxide/hydrogen sulfide/ammonia/carbon dioxide and other gases
Mainly used in limited action space, can be detected by pumping sampling, sampling distance can reach about 80 meters, endurance 2~3 days, built-in 4G module, data can be uploaded to the cloud platform, view real-time concentration, monitor on-site images, monitoring can be viewed online through mobile phones or computers.
| Output signal |
① 4-20mA signal: standard 12-bit precision 4-20mA output chip, transmission distance 1Km ② RS485 signal: standard MODBUS RTU protocol, transmission distance 1Km ③ voltage signal: 0.4-2V,0-5V,0-10V output, optional (voltage output and current output two choose one) ④ Switching signal: standard 1 set of passive contact relay, capacity 220VAC3AV/24VDC3A |
GPRS, 4G, WIFI, LORA, ZigBee and other wireless signals | |
| Measuring gas | Combustible gas, oxygen, carbon monoxide, hydrogen sulfide (according to the working conditions with different gases) | Detection principle | Catalytic combustion/electrochemistry (other principles can be customized) |
| Range selection |
Default Range CH4:0-100%LEL O2:0-30% VOL CO:0-1000PPM H2S:0-100PPM |
Resolution |
CH4:0.1%LEL O2:0.01% VOL CO:0-1PPM H2S:0-0.1PPM |
| Sampling accuracy | ±3%F.S | Response time | T90<10S |
| Working temperature | -20~50 ℃ | Working humidity | 0-95%RH |
| Storage temperature | -20~50 ℃ | Preheating time | 10S |
| Working current | ≤50mA | Working air pressure | 86kpa-106kpa |
| Operating voltage | DC5V±1%/DC24±1% | Baud rate | 9600 |
| Sampling mode | pump suction type | Warranty period | 1 year |
| Exterior Material | Aluminum alloy | Service life | 1-5 years |
| Protection level | IP66 waterproof splash and short time rain | Explosion-proof grade | E x d I IC T 6 |
| Receiving equipment | User computer, control alarm, PLC, DCS, DDC, etc. | ||
| Alarm mode | On-site sound and light alarm, external alarm, remote controller alarm, computer data acquisition software alarm, etc. | ||
| Alarm Settings | Standard configuration of two-level alarm, optional three-level alarm; alarm mode can be set: regular high and low alarm, interval control alarm | ||
| Connection cable |
① Select three-core shielded cable for 4 ~ 20mA and four-core cable for RS485. When the distance exceeds 1000 m (with a detector), the single wire diameter shall be ≥ 1.5mm, and the shielding layer shall be connected to the ground. ② wireless transmission: can be built-in LORA, Zigbeg module, short-range wireless transmission; external GPRS/4G module, remote data transmission to the cloud platform, can be viewed on the computer side and mobile phone side of the history, not limited by distance (optional) |
||
| Optional accessories | High temperature sampling handle | ||

This professional portable H2O2 hydrogen peroxide single gas detector supports pump suction & dual diffusion sampling, with 180° auto-rotating color screen, 4G/WiFi/Bluetooth/LORA multi connectivity. It stores up to 120,000 historical records, features multi-level alarm, wide optional H2O2 ranges, USB Type-C charging & data export, ideal for industrial H2O2 leakage monitoring.

HNAG920-C2H6O is a professional portable single ethanol C2H6O gas detector with dual pump suction & diffusion sampling modes. It features auto 180° rotating color screen, one-touch emergency alarm, Type-C 2-in-1 charge & data export, max 120,000 data logs, optional 4G/WiFi/Bluetooth/LoRa. Multiple ethanol measuring ranges available, explosion-proof Ex certification for factory, laboratory & alcohol workshop safety monitoring.

Discover the Combustible Online Gas Detector LEL Alarm Monitor System. This advanced system is designed for real - time detection of combustible gases. It offers high - precision monitoring, rapid alarm response to ensure safety in environments with potential gas hazards. Ideal for industrial settings, it helps prevent gas - related accidents and provides reliable data for better management.

This HNAG920-C2H4 portable ethylene (C2H4) single gas detector adopts pump suction & diffusion dual sampling design, with 180° auto-rotating color screen. It supports 4G/WiFi/Bluetooth/LORA multi wireless modes, mobile viewing & Bluetooth printing, stores 120,000 historical records. It has multi-level audible-visual alarm, IP rugged housing, multiple optional measuring ranges for industrial ethylene leakage detection.

Secure your facility with Skyeaglee's split-type helium and argon gas detector. Features thermal conductivity sensing, ranges up to 100%vol, IP66 rating, and real-time monitoring.

Portable HNAG920-SF6 single gas detector for sulfur hexafluoride leakage detection, measuring range optional 0-1000/2000/3000/5000ppm. Adopts high precision sensor, with auto screen rotation, multi-alarm system, 120,000 historical data logs, support WiFi/Bluetooth/LoRa/4G wireless transmission, CE, Ex, SIL3 certified for power substation electrical equipment SF6 leak inspection.

This HNAG920-CS2 portable carbon disulfide gas detector supports multiple CS2 measuring ranges from 0-20ppm to 0-10000ppm. It adopts advanced sensing principle, features auto screen rotation, dual pump/diffusion sampling, 120,000 historical data logs, multi wireless transmission, Type-C 2-in-1 charging & data transfer, visual & audible multi-alarm, rugged PC+TPU housing for industrial hazardous scenarios.

This HNAG920-NH3 handheld single ammonia gas detector provides 12 optional NH3 measuring ranges from 0-10ppm up to 0-100%Vol. It supports auto 180° screen rotation, 4G/WiFi/Bluetooth/LORA wireless transmission, Type-C rechargeable design, 4-side LED alarm lights, durable PC+TPU housing, and allows mobile data viewing & Bluetooth printing for chemical plants, livestock farms and refrigeration workshop hazardous gas monitoring.

Skyeaglee HANG-900-CH4-C portable methane gas detector with catalytic detection 0-100%LEL, IP65, Ex ib II CT4 Gb. Expandable to 6 gases, 5400mAh, USB data export. Professional methane gas monitor for oil, coal, petrochemical.

Explore the Portable pump - assisted diffusion - type hydrogen gas detector. This detector combines pump - assisted and diffusion - type features, offering high - precision hydrogen detection.

The HNAG1000-PM is an industrial fixed dust detector featuring a high-precision laser scattering sensor. With IP66 protection, explosion-proof casing, and RS485/4-20mA outputs, it ensures real-time, accurate PM monitoring for harsh environments.

Engineered for hazardous industrial sites, the HNAG1000-PM-M provides continuous online particulate matter monitoring. With an IP66 rugged enclosure, ExdIICT6 certification, and seamless PLC integration via RS485/4-20mA, it guarantees absolute safety.

Category: Products Flue gas pretreatment system Simple Pretreatment Online Monitoring System Key words: Products Model: SK/MIC-7500 Measurement object: CO2/Ex/CH4/CO/H2S/O2/N2/NH3/CL2/H2/He/Ar/CH2O/O3/NO/NO2/SO2/C2H4O/PH3/COCL2/HBR/HCL/HCN/CLO2/SIH4/...

HNAG900-NH3 portable ammonia gas detector adopts imported Honeywell sensor with pump suction design. It supports multiple optional NH3 measuring ranges, equips flexible sampling probe, multi-mode data transmission including 4/5G, LoRa and Bluetooth, supports local data storage & USB export, ideal for industrial leak check, indoor air monitoring and on-site environmental testing.

This HNAG900 handheld H2S hydrogen sulfide gas detector adopts imported sensor, 0-10ppm measuring range, built-in vacuum suction pump. It supports real-time curve display, USB data export, optional 4/5G, LoRa and Bluetooth transmission, equipped with bendable sampling probe, long-life battery, widely used for industrial leak check, indoor air quality inspection and on-site environmental gas testing.

HNAG900 portable CO carbon monoxide gas detector supports multiple measurement ranges for atmospheric & industrial gas monitoring. Equipped with imported Honeywell sensor, built-in vacuum suction pump, 27cm bendable sampling probe. It supports USB data export, 4/5G, LoRa, Bluetooth transmission, with large data storage, audible alarm, stable performance for factory leak check, ambient air inspection and industrial safety detection.

This pump-type portable CH4 methane detector equips Honeywell high precision sensor, supports multiple measuring ranges for methane testing. It adopts color LCD curve display, supports 4/5G cloud upload, LoRa and Bluetooth transmission for remote viewing, onsite printing and USB data export. 5400mA large battery offers long runtime, optional high/normal temperature probes, ideal for industrial methane leak check, environmental testing and indoor gas monitoring.

This portable pump-suction CO2 gas detector adopts imported Honeywell sensor, supports multiple measuring ranges for CO2 detection. Equipped with color LCD trend display, 4/5G, LoRa P2P and Bluetooth data transmission, it supports mobile/PC remote viewing, Bluetooth printing and USB data export. 5400mA large battery ensures long operation time, optional high/normal temperature sampling probes, widely used for indoor air test, industrial leak inspection, environmental monitoring.

This portable CH2O formaldehyde single gas detector adopts high-precision electrochemical sensor, supports pump suction & dual diffusion sampling, 180° auto screen rotation, 120,000 historical data storage, Type-C charging & data export, multiple wireless transmission modes, audible-visual alarm, IP rugged housing, widely used in indoor decoration, factory workshop, industrial environmental formaldehyde concentration detection.

This professional portable H2SO4 sulfuric acid single gas detector supports 0-30mg/m³ & 0-300mg/m³ measuring ranges, with pump suction & dual diffusion sampling modes, auto 180° screen rotation, multi-alarm design, 120,000 historical data storage, 4G/WiFi/Bluetooth/LORA connectivity, IP-grade rugged PC+TPU housing, ideal for chemical plant, lab and industrial toxic gas monitoring scenarios.

This professional portable H2O2 hydrogen peroxide single gas detector supports pump suction & dual diffusion sampling, with 180° auto-rotating color screen, 4G/WiFi/Bluetooth/LORA multi connectivity. It stores up to 120,000 historical records, features multi-level alarm, wide optional H2O2 ranges, USB Type-C charging & data export, ideal for industrial H2O2 leakage monitoring.

HNAG920-C2H6O is a professional portable single ethanol C2H6O gas detector with dual pump suction & diffusion sampling modes. It features auto 180° rotating color screen, one-touch emergency alarm, Type-C 2-in-1 charge & data export, max 120,000 data logs, optional 4G/WiFi/Bluetooth/LoRa. Multiple ethanol measuring ranges available, explosion-proof Ex certification for factory, laboratory & alcohol workshop safety monitoring.

Discover the Combustible Online Gas Detector LEL Alarm Monitor System. This advanced system is designed for real - time detection of combustible gases. It offers high - precision monitoring, rapid alarm response to ensure safety in environments with potential gas hazards. Ideal for industrial settings, it helps prevent gas - related accidents and provides reliable data for better management.

This HNAG920-C2H4 portable ethylene (C2H4) single gas detector adopts pump suction & diffusion dual sampling design, with 180° auto-rotating color screen. It supports 4G/WiFi/Bluetooth/LORA multi wireless modes, mobile viewing & Bluetooth printing, stores 120,000 historical records. It has multi-level audible-visual alarm, IP rugged housing, multiple optional measuring ranges for industrial ethylene leakage detection.

Secure your facility with Skyeaglee's split-type helium and argon gas detector. Features thermal conductivity sensing, ranges up to 100%vol, IP66 rating, and real-time monitoring.

Portable HNAG920-SF6 single gas detector for sulfur hexafluoride leakage detection, measuring range optional 0-1000/2000/3000/5000ppm. Adopts high precision sensor, with auto screen rotation, multi-alarm system, 120,000 historical data logs, support WiFi/Bluetooth/LoRa/4G wireless transmission, CE, Ex, SIL3 certified for power substation electrical equipment SF6 leak inspection.

This HNAG920-CS2 portable carbon disulfide gas detector supports multiple CS2 measuring ranges from 0-20ppm to 0-10000ppm. It adopts advanced sensing principle, features auto screen rotation, dual pump/diffusion sampling, 120,000 historical data logs, multi wireless transmission, Type-C 2-in-1 charging & data transfer, visual & audible multi-alarm, rugged PC+TPU housing for industrial hazardous scenarios.

This HNAG920-NH3 handheld single ammonia gas detector provides 12 optional NH3 measuring ranges from 0-10ppm up to 0-100%Vol. It supports auto 180° screen rotation, 4G/WiFi/Bluetooth/LORA wireless transmission, Type-C rechargeable design, 4-side LED alarm lights, durable PC+TPU housing, and allows mobile data viewing & Bluetooth printing for chemical plants, livestock farms and refrigeration workshop hazardous gas monitoring.

Skyeaglee HANG-900-CH4-C portable methane gas detector with catalytic detection 0-100%LEL, IP65, Ex ib II CT4 Gb. Expandable to 6 gases, 5400mAh, USB data export. Professional methane gas monitor for oil, coal, petrochemical.

Explore the Portable pump - assisted diffusion - type hydrogen gas detector. This detector combines pump - assisted and diffusion - type features, offering high - precision hydrogen detection.

The HNAG1000-PM is an industrial fixed dust detector featuring a high-precision laser scattering sensor. With IP66 protection, explosion-proof casing, and RS485/4-20mA outputs, it ensures real-time, accurate PM monitoring for harsh environments.

Engineered for hazardous industrial sites, the HNAG1000-PM-M provides continuous online particulate matter monitoring. With an IP66 rugged enclosure, ExdIICT6 certification, and seamless PLC integration via RS485/4-20mA, it guarantees absolute safety.

Category: Products Flue gas pretreatment system Simple Pretreatment Online Monitoring System Key words: Products Model: SK/MIC-7500 Measurement object: CO2/Ex/CH4/CO/H2S/O2/N2/NH3/CL2/H2/He/Ar/CH2O/O3/NO/NO2/SO2/C2H4O/PH3/COCL2/HBR/HCL/HCN/CLO2/SIH4/...

HNAG900-NH3 portable ammonia gas detector adopts imported Honeywell sensor with pump suction design. It supports multiple optional NH3 measuring ranges, equips flexible sampling probe, multi-mode data transmission including 4/5G, LoRa and Bluetooth, supports local data storage & USB export, ideal for industrial leak check, indoor air monitoring and on-site environmental testing.